Відео

Where can I buy one? Edgun west is out of stock. Do they even still make these?

Hey I just got the yokozuna 35 and a aea HP max 35. Do I need another piece to connect?

Great content as always Airbuks, thank you! You mentioned a tiny white washer for the side gauge, do you have a pic of what that looks like? I have a very small leak on my rifle and my suspicion is that it's gauge related. Cheers.

Good compressor

Great video thanks buddy, when buying the block can you buy the list of parts needed as a package? For people wanting to build there own

Did you say 115 bar with the Raptor regulator for your Leshyi 2.

I think your a dam genius and that looks so so good and you did a excellent job. I'm having indexing problems with my 30 caliber LESHYI 2. It will shoot like 2 shots then stop so I have to open the gun and turn magazine then shoot again it's a pain in the ass and I tightend the barrel and everything I could think of but still doing it can you help me out you helped me out alot in the past with my EDGUNS.

There's lots of videos showing the rebuild of the valve but none show replacing the Oring that seals it to the rifle.

what caliber

You always do great videos my friend on showing each step carefully and I really appreciate that my friend.

Just to be sure..you can remove just the liner without bleeding the plenum right?

This is a great step-by-step process for barrel conversion.

What Model of the Bi-Pod are you using. I tried to check on their site but it's hard to tell. Looks great on the rifle. Also whats your opinion on the Element Optics Helix 6-24x50. The Theo's out of my price range :) LOL

Did you ever test out that ryu?

I just purchased an fx impact Mark 3, 600 mm Barrel 30 caliber, slug liner and slug power kit. I haven't tried the gun yet. The question I have is the spec sheet says 105 shots 30 cal and 124 FPE. Are these numbers related to shooting slugs or pellets? The spec sheet states that 124 FPE relates to shooting slugs but it doesn't say anything about the shot count related to slugs or pellets.

THANK YOU for posting this video. THERE WERE NO INSTRUCTIONS with my angle bracket kit.

Please help The brass plug 19694 Can you tell me the upper diameter of it and the groove diameter where the o-ring sets ?

Tried . But really not working

I owned a Leshy 2 in 25 with their expensive moderator. After a few months it was all over the place on an accuracy basis. The tank would not hold air for very long. Took it to Brian, Edgun West, and they charged me to fix it! I had their mod kit, everything. These guns are good short term, but long term they are crap. You'll never know that from these type of quick evaluations. Also, most of these people are not buying these, and in many cases are working WITH Edgun West. I got rid of the gun. Keep your money, and buy an FX or a Daystate or something else. I owned 2 Edguns, and just about every other high end gun. EDGUN was the worst, and Edgun West has the worst customer service. I bought it directly from Edgun West, and dumped it after about a year.

Excellent video, my Mk2 came with a power plenum, now I understand what that is a bit better, do you have a video about tuning for it, pellet selection, etc?

Please can you show how to do the impact m4. Please thankyou

Fantastic video

Can u please so how to do the fx4.

Προβληματο

I have tech ? on the powerblock and the 720 plenum upgrade kit for my impact2 you sold me on how do I get a hold of you to solve this issue i'm having with my new valve rod even with the C1 screwed all the way on it measures no less 8.49mm to get my gun right.And yes everything is tight and flush together also I have visual of the of the valve rod through the back hole Sincerely Dave

Thank you

The barrel system of the crown is SUCH a weak point of the gun. Especially the longer the version you have. If you ever drop the gun barrel first all the stress is on just a few inches of it that are clamped into the block the gun. I bought a used one that wouldn’t sight in. That was why. It’s a really poor design.

Can you tell me the difference between the left and right constant pressure meters? Never understood.I come from China.

👏🌹

Your mail id so that i can share photos of it

Sir what is size of O ring which in back end of power block which is silver where magazine is inserted

You really break it down nicely and make anyone with common sense feel they can do what you do with confidence to there FX. I have had my Impact2 for six years since the day I bought it I have never had a problem with it until three days ago, at 30 yards, my 30 calibre pellet dropped 5 inches from zero, and the pellet stuck in the wood, which normally goes cleanly through it. I also noticed my gauge on the bottom of the power block reads zero. Anyways I have been wanting to add the 720 plenum and power block to catch up with the M3. It should arrive next week from Huma Air. So I decided to do your leak test started from back to front and a truly thank you for making this video ! was starting to get nervous. I finally found a small leak in my fill port. Just so you know I don’t lose any pressure on my bottle gauge. It stayed steady for four days. just has no power to shoot properly. I am truly hoping with my new 720 on its way to secure this problem if you have any input looking forward to it. Thanks again sincerely Gun Smith, Dave

Thank you so much for sharing this video .This helped me replace an unseated valve & valve rod. I really appreciate your efforts

What moderator was the most quite on your Leshyi 2 my friend.

Mathis, your explanation is perfect and I really appreciate the time you take to explain each step, where, in other videos they don’t take time to explain very well. They move too fast because they know what they’re doing and they forget there are newcomers out here.

Compa una pregunta

БЕГЕМОТ ГАВНО, не покупайте

rubbish, its gota long way togo.

I noticed that there are 2 o rings in that package. Did you not need them? Also I have also seen Tungsten hammers for some FX rifles. What’s the difference between the slug hammer and the tungsten hammer it is it just the weight. Lastly why would one select the tungsten hammer over the slug hammer

Are there FX Pantera barrel kits available at this time?

Foam purchase link

Another subscriber from me.... top man. My Mk2 .25 just blew tonight emptying entire cylinder immediately blowing on my cheek like an explosion. I have just upgraded it with slug power kit, slug probe, slug barrel, carbon sleeve etc... Any ideas where I should look first? It was not running full power when it blew. I dry fired it once or twice without any air which I now realise according to the manual I shouldnt have done. 😭

How to order that sir?

for long range range with slug , which one to choose between FX impact and panthera ?

Excellent informative video my friend 👍

You have o-rings on your liner which means that the carbon sleeve is missing. The 600 and 700 should come with a carbon sleeve

Do you use facebook

Helo

Thanks for the video. Unfortunately my new-ish M3 started a very slow leak too. Just so happens it's in the same spot as yours. Your video was very helpful. FX should do something about this issue

On the stats screen, which BC would you recommend using? BC G1 or AVG BC?